کدهای خطا HP LaserJet 1018
پنجشنبه 10 اسفند ماه 1402
| LED status | Description |
| OFF ON | Ready The product is ready to print. No action is necessary. |
| OFF Blinking | Processing data The product is receiving of processing data. Wait for the job to print. |
| Blinking Blinking | Cleaning mode A cleaning page is printing. Wait until the cleaning page has finished and the printer is in the Ready state. This could take up to two minutes. |
| Blinking OFF | Out of memory The printer is out of memory. The page you are printing might be too complex for the printer's memory capacity. Try lowering the resolution. |
| Blinking OFF | Attention: door open, no print cartridge, or media jam The printer is in an error state that requires operator intervention. Check the following: The print cartridge door must be completely closed The print cartridge is correctly installed. There is no media jam. |
| Blinking Blinking | Printer initialization The printer is initializing. No action is necessary. |
| ON ON | Fatal error Turn off the printer, and then unplug the printer power cord for 30 minutes. Plug the printer power cord into the power outlet, and then turn the printer on. |
| OFF OFF | Make sure that the power switch is in the on position. Make sure that the printer power cord is plugged into a active power outlet. Unplug both ends of the printer power cord, and then plug the power cord back into the printer and the power outlet. |
